Click image to view full size image
The procedure of this system is as follows
1) Rebar end upsetting machine is used to enlarge the Dia. of rebar
2) Then use rebar thread cutting machine to cut threads on the enlarged end of rebar
The parameter of Rebar Upsetting Machine is as follows:
| Model | UPSET FORGING MACHINE |
| Dia. of Upsetting Rebar | 16-40mm |
| Oil Pressure Flux | 5.6L/min |
| Max Pressure | 63 Mpa |
| Voltage | 380V 50Hz |
| Power | 4kw |
| Net Weight | 620kgs |
Upset Forging Machine
